
Keep the Daylight.
Cover the Draft.
A clear, flexible layer for the inside of a chilly window frame. Span the opening with one transparent sheet, add a barrier against moving air, and keep the view and the afternoon light exactly where they were.
A simple layer. A view that stays.
The white hook-and-loop border lets you lift the sheet away from the frame and press it back into place whenever you need the window.
Daylight and the outside view stay put
Lift off, press back on
Plus custom sizes on request
One clean, neutral finish
Two Things to See Before You Measure
How the border releases when you need the window, and how the sheet meets the frame on the way in.
Lift off, press backThe bound edge separates from the frame fastener without peeling anything off your window.
Along the frame, in orderAlign the top edge first, then work around the perimeter so the border sits flat.
Your Window Seat
Is Still Yours. ☀️
Keep the trees, the winter sky, and the afternoon light in view. The transparent sheet spans the opening in one piece, so you gain a layer against cold airflow without hiding what is outside.
The chair beside the sofa, the bed headboard wall, the desk that faces the glass — anywhere a chill shows up during ordinary hours, that is where the cover earns its place first.
A Stitched Border.
A Frame That Grips.
The flexible film carries stitched white fabric binding around all four edges. Hook-and-loop fastening connects that border to the mounting strips on your window frame — perimeter contact rather than a single point of adhesion.
- Three parts, one job
Clear panel to span the opening, bound edge to hold its shape, frame fastening to keep it seated.
- Not stuck to the glass
The sheet stays in front of the window and attaches around the frame, so the pane itself is untouched.
Lift It Off.
Press It Back On.
Winter covers are only useful if the window underneath still works. Because the border separates rather than peels, access stays part of the design.
- Open up access
Separate as much of the bound edge as you need to reach the window, then clean the film or let in air.
- Reconnect around the frame
Align the border and press it back along the perimeter when you are ready to cover the window again.
Line It Up.
Press the Edges.
Begin with a clean, dry mounting surface and take a moment to align the border before pressing anything into place.
Measure the frame area
Take both directions across the flat mounting surface inside the frame — not just the glass.
Prepare the surface
Confirm the finish suits the mounting strips, then wipe it clean and let it dry.
Attach and check
Position the fastening, align the top edge, press around the perimeter and look for gaps.
Draft reduction depends on fit, installation, and the condition of your existing window.
Measure Where
the Border Will Sit. 📏
Choose from the commonly ordered sheet sizes below, allowing enough flat frame for the border all the way around. The right column is a rough guide, not a rule — your measurement decides.
| Sheet size | Approx. inches | Often ordered for |
|---|---|---|
| 60 × 80 cm | 24 × 31 in | Small bathroom, stair & toilet windows |
| 100 × 100 cm | 39 × 39 in | Single and square casement windows |
| 100 × 120 cm | 39 × 47 in | Bedroom and study windows |
| 100 × 150 cm | 39 × 59 in | Tall casement windows |
| 120 × 150 cm | 47 × 59 in | Living-room double windows |
| 150 × 150 cm | 59 × 59 in | Larger picture windows |
| 180 × 160 cm | 71 × 63 in | Wide living-room and dining windows |
| 200 × 200 cm | 79 × 79 in | Floor-to-ceiling glass and doors |
Non-standard size? Sheets can be cut to your measurements — send your frame dimensions before ordering, and volume orders can be discussed on request.
Sizes refer to the full sheet. If your option labels list height first, read the two numbers in that order.
What You Are Ordering
Removable window insulation cover, for interior use
Transparent flexible film, one piece across the opening
Stitched fabric binding around the perimeter
White — the only color offered for this cover
Frame-mounted hook-and-loop strips
Multiple sheet sizes, with custom cutting on request
Detach, wipe with a damp cloth, or rinse and air-dry before refitting
Cover sheet plus mounting accessories for your selected option
Before You
Fit the Film.
A few practical details about choosing, attaching, and looking after your clear window layer.
Does the film stick to the glass?
No. The fastening sits on the flat inside surface around the window, and the clear sheet spans the opening from the frame. Nothing is applied across the pane itself.
Can I still get to my window?
Yes. Lift the bound edge away from the hook-and-loop to reach the frame, then align it and press it back around the perimeter. Choose an install position that keeps handles, locks, and blinds clear.
How do I choose the right size?
Measure both directions across the flat surface where the border will attach, then compare that with the sheet sizes above. Measure the mounting area rather than the glass alone, and leave room for the border to sit flat.
Why is the binding only white?
White keeps the edge visually quiet against light-colored frames and lets the transparent panel do the work. There is no second color option for this cover.
Will the mounting strips leave marks?
Adhesive behavior and removal vary with frame material and finish. Check compatibility first and follow the strip instructions — mark-free removal cannot be guaranteed on every surface.
How do I clean and store it?
Wipe dust away with a damp cloth, or detach the sheet for a rinse and let it dry completely. Fold it loosely and keep it somewhere flat and cool until the next cold season.
Does it replace the window?
No. It is a seasonal addition that works with the window you already have — one more layer across the opening, no glass replacement and no permanent alteration to the frame.
Make Room for Cozy. 🪟 Measure your frame, choose your sheet, and keep the daylight coming through all season.